Abstract Analytical and computational calibrations and subsequent parametric analyses were performed on the four UHPFRC beams under flexure to estimate their actual shear strength. The computational models were calibrated using different values for the CDP parameters, and a finite element mesh sensitivity study was conducted. These models predicted the experimental behavior satisfactorily, and the analytical model was also able to find the beams’ failure loads and proved to be a simple tool to estimate their behavior. The parametric analysis showed that the current beams did not require stirrups once the UHPFRC had high shear strength, and the maximum shear capacity was accurately determined.

Abstract The use of simple bar elements in nonlinear structural finite element formulations has the academic advantage of uncoupling element technology issues from the structural phenomena to be observed. In this work, we present a finite element setting for the formulation of different nonlinear material models applied to the transient analysis of trusses. While nonlinear elasticity is considered by studying a Hooke-like linear relationship between different pairs of nonlinear measures of stress and strain, hyperelasticity is formulated using Ogden’s model. Viscoelasticity is introduced using a generalized Kelvin rheological model to account for strain rate effects. The finite kinematics is set in a corotational total Lagrangian description where the virtual work is described using the Second Piola-Kirchhoff and the Green Lagrange measures. Although the derivation is omitted, the consistent tangent moduli are given for all these cases. Numerical problems involving simultaneously different truss models are studied and made available as benchmarks since little comparative data is found in literature.

Abstract Based on the inverse piezoelectric effect and other characteristics of piezoelectric ceramics, a new type of piezoelectric variable friction damper is developed, and the output performance test of piezoelectric ceramic actuator and piezoelectric variable friction damper is carried out, and the parametric mechanical model of the damper is established by using Simulink to carry out numerical simulation, and compared and analyzed with the test results. The results of the study show that the simulation and the test present a good regular agreement. With the increment of loading voltage, the displacement deformation and zero-displacement thrust of piezoelectric ceramic actuator are approximately linear with the loading voltage; when the loading voltage is increased by 15V every time, the test value of the output damping force of the damper increases by 259.66N on average step by step, and the simulated value increases by 256.14N step by step, and the damping force has a linearly incremental relationship with the voltage and the slope of the linear increase is 16.434.

Abstract In this paper, the penetration resistance of 6061 aluminum plates to explosively formed projectiles (EFPs) at the incidence angles of 0°, 15°, 30°, and 45° was studied. The penetration process was roughly divided into three typical stages—the plastic flanging stage of the target, the righting stage of the projectile, and the plug formation stage of the target. Through the energy analysis, the energy consumption of the aluminum plate increased with the increase in the incidence angle during the entire penetration process. Through the microscopic analysis of the perforated wall surface of the aluminum plate, it was found that there were distinct boundaries and differences between the plastic reaming zone and the punching plug fracture zone.. Overall, four kinds of classification modes were proposed for the damage of the aftereffect plate, which provides a method to evaluate the aftereffect of EFP oblique penetration into 6061 aluminum plates.

Abstract To further improve the strike accuracy and penetration power of explosively-formed projectile (EFP) after long-distance flight, a polygonal charge capable of forming EFP with tail fins was designed during the study. A model for calculating the EFP velocity was derived from the effective charge and detonation projection theories with the integration of calculus. The circumferential velocity distributions of EFP formed using polygonal charges were obtained using this model, and the mechanisms underlying the formation of tail fins were elucidated. The feasibility of using this polygonal charge to form tail fin EFP was verified by conducting multi-media soft recovery tests and numerical simulations. Furthermore, the feasibility of forming tail fin EFP using polygonal charges with different numbers of sides and the effects of the structural parameters of a hexagonal charge on the formation of tail fin EFP were investigated by simulation. The ranges of optimal values for the structural parameters of a hexagonal charge capable of forming high-performance tail fin EFPs were determined. explosivelyformed explosively (EFP longdistance long distance flight study calculus elucidated multimedia multi media simulations Furthermore simulation highperformance high performance determined

Abstract In typical dynamic soil-structure interaction (SSI) problems, the dynamic response a structure can be affected by the existence of some nearby structures, which is sometimes referred to as the dynamic structure-soil-structure interaction (SSSI). This effect is especially important in the earthquake engineering design of adjacent nuclear power plants, as the safety risk is relatively high. However, the current understanding on the SSSI of nuclear power plants is still insufficient. In this work, we use the finite element method to investigate the SSSI of two nuclear power plants located at a specific distance under earthquake excitation. Four nuclear-power-plant-soil systems are designed to account for the SSI and SSSI respectively, where the soil properties are obtained from drilling data. The effect of the SSSI on the nuclear power plants is studied by comparing the dynamic responses of four nuclear power plants-soil systems in vertical and horizontal directions, in which both layered soils and local weak interlayer soils are considered. The results of numerical study show that the presence of one nuclear power plant has a favorable effect on the seismic response of an adjacent nuclear power plant, such as reducing the displacement response, but this effect is limited. In addition, the SSSI effect is related to not only the soil properties, but also the direction of ground motion. Furthermore, the existence of soft soil layers complicates the SSSI effect. The results provide important insights for the construction and expansion of nuclear power plants.

Abstract In this paper, the hybrid differential evolution and symbiotic organism search (HDS), is the first-time developed for general solutions of a piezoelectric stack in ultrasonic transducers. The convergence and reliability of the new algorithm are verified through comparison with corresponding data from similar previous publications and differential evolution (DE) algorithm. This study also presents and discusses the calculation results using HDS for commercial piezoelectric stacks. The Matlab HDS programs for a segmented piezoelectric (PZT) model have advanced features including its applicability to any configurations, thickness and arbitrary layer numbers of PZT. Using the novel proposed technique, there is no requirement for initial data guess, no limitations for piezoelectric stacks and the convergence rate is much faster than DE. Therefore, the HDS is promising for direct evaluation of specific aging or degradation mechanisms of ultrasonic transducers.

Abstract Wind-induced loading on buildings may be altered due to presence of upwind structures. These variations are quantified by the interference factors (IFs), which is determined experimentally for each case analyzed, since obtaining this quantification in codes and standards is still impractical due to the complexity of the multi-parameters involved. To understand the influence of some of these parameters on the interference effects, contour plots and power spectra density were presented for IFs corresponding to aerodynamic coefficients of the along-wind and cross-wind force, as well as for torsion. Wind tunnel tests were conducted applying the synchronous pressure measurement technique. Interference arrangements with one and two upstream interfering buildings were investigated for different wind angles, relative positions and terrain roughness. Results indicate that the shielding effect is predominant in most of the studied cases. Nevertheless, the amplification effects are generally present in specific configurations and are usually caused by channeling and buffeting effects, as well as vortex shedding.

Abstract This paper describes an isogeometric analysis of the boundary element method, called IGABEM, applied to anisotropic 2D plane elastic problems. The Lekhnitskii's anisotropic fundamental solution is used and the singular integral terms is regularized. For the weak singularity kernel, the Telles transform is used. On the other hand, in the strong singularity term, the Singularity Subtraction Technique - SST is used. The shape functions used are the Non-Uniform Rational B-Spline - NURBS. Thus, the same mathematical representation of Computer Aided Design - CAD is used in the implemented computational code. This avoids the generation of meshes and provides an exact representation of most complex geometries. As a reflection of this isoparametric concept, errors from geometric interpolation are excluded, improving numerical results. Furthermore, to increase the numerical efficiency of the code, the NURBS are decomposed into Bézier curves. To evaluate the accuracy of the formulation, complex problems using high-order isogeometric boundary elements are analyzed. Their results are compared to analytical solutions showing good agreement.

Abstract The potential risk of cable-stayed arch-truss damage is large and the damage is undetectable. The damage identification methods based on frequency domain have limitations such as limited data and complex theoretical methods. A damage identification method based on multi-node time-domain data fusion was proposed to overcome these limitations. The time-domain data library was established by finite element analysis, and the time-domain data was preprocessed and augmented. Two CNNs models were established to identify the damage location and damage degree of cable-stayed arch-truss. The proposed method was verified by the analysis of a practical cable-stayed arch-truss scale model, and the recognition effect of the method on noisy data and noise-free data was studied respectively. The results showed that the CNN can effectively identify the damage degree and damage location of cable-stayed arch-truss structure with good robustness. CNN with Gaussian noise can accurately predict the damage degree of cable-stayed arch-truss. The prediction error of most elements is within 15%, which can meet the actual needs of engineering.

Abstract This study highlights the analysis of corrosion shape effects under thermo-mechanical loading on the development of damage in corroded and cracked aluminum plates. This study is divided into two parts, the numerical analytical part, was performed to compare the effect of the corrosion geometry on the repair and adhesive damage; We analyzed the effects of damaged areas on the level of corrosion in the adhesive layer of three composite materials (boron/epoxy, glass/epoxy, and graphite/epoxy), and studied the change of the stress intensity factor for circle or square-shaped corrosion. The second part related to an experimental study of the corrosion shape on the ultimate strength of the damaged plate repaired by the boron/epoxy composite material. The results obtained, indicated that the effect of the circular shape of corrosion is small compared to the square shape. The type of composite material (boron / epoxy) has proven its optimal effect on repair.

Abstract Compared to other orthodontic acceleration methods such as drug, electric current, and laser, vibratory loading is less invasive and easier to use. But the optimal duration for vibratory load application has not been determined, nor can the alveolar bone parameters be predicted after vibratory load application. Therefore, this work examined the mechanism of vibration-accelerated alveolar bone reconstruction and established a numerical model for simulating alveolar bone damage caused by vibration loads. That is, the role of vibration load in orthodontic acceleration was analyzed, and a finite element model was established to validate the vibra-tion-accelerated orthodontic mechanism with a simulated numerical model of alveolar bone damage. The optimal duration of application was obtained for the right anterior incisor under vibratory loading of 5 N orthodontic force, 50 Hz in the gingival orientation and 0.2 cm amplitude for 120 to 140 minutes. This work is of guidance and reference significance in promoting the development of orthodontic treatment and shortening the orthodontic treatment cycle.

Abstract In this article, the efficiency of the tuned liquid column damper (TLCD) in reducing structural vibration is analyzed. The analysis by numerical methods and by analytical methods is adopted in the search for the ideal parameters for the liquid column. The equivalent linear model is considered for the U-shaped liquid column equation of motion with damping resulting from an orifice. Thus, variation of TLCD parameters for different loads is investigated. Initially, for the numerical study in conjunction with the analytical formulation, a sinusoidal forcing is adopted. Subsequently, the action of an earthquake through the recorded ground accelerations is considered in the case study. Optimal TLCD parameters are presented via response map for reducing the structure's maximum permanent response to harmonic excitation and for reducing the structure's rms response to seismic excitation with wide frequency and various amplitude. The variation of the TLCD parameters presented by the response map is directly related to the force acting on the structure. However, it is verified that regardless of the acting force, there is an ideal frequency range to tune the TLCD where the greatest reductions in the primary system response are found. It appears that reducing the aspect ratio of the liquid column makes this range narrower, making the damper more sensitive to parameter variations, as well as its performance. It is also observed that the increase in the attenuator mass ratio combined with the correct tuning and damping ratios present greater reductions in structural vibration. Also, the frequency ratio is reduced with the increase of the mass ratio, while the damping rate of the liquid column increases. From the ideal liquid column parameters determined by the parametric analysis, structural response reductions of approximately 60% were achieved.

Abstract In this paper, negative poisson's ratio material is used to fill the interlayer of mine refuge chamber, and its characteristics such as light weight, thermal insulation, vibration isolation and impact resistance are used to improve the impact resistance and thermal insulation ability of mine refuge chamber. The equivalent density, elastic modulus and yield strength of negative poisson's ratio structure of material Q345 were obtained by simulation analysis. The negative poisson's ratio material was filled into the mine refuge chamber, and the impact energy absorption and explosion transient thermal analysis were carried out. The results show that compared with the prototype, the maximum inner skin temperature of the negative poisson's ratio refuge chamber is reduced by 44.86%, the transverse and longitudinal stiffeners temperature is reduced by nearly 46.77%, and the impact deformation is reduced by 35mm, which has better safety performance. The response surface optimization method was used to optimize the whole refuge chamber filled with negative poisson's ratio material, which was more secure than before.

Abstract A metaheuristic approach for variable axial composites considering multiobjective optimization is investigated. The proposed methodology is based on the combination of three main parts: a methodology for defining the orientation of the fibers in the laminate, a structural analysis program (based on the Finite Element Method) and an optimization algorithm. It is important to highlight that a radial basis function (RBF), which describes a smooth fiber pattern, is generated using control points. The novelties of the present methodology consist of a proposal for a generalized parameterization technique, which allows the investigation of mechanical strength and stress concentration of variable axial composites. Thus, NSGA-II multiobjective genetic algorithm is used as optimization tool to define the fiber orientations. Besides, ax metaheuristic approach is used in situations when it is desirable to simultaneously minimize the stress concentration factor ( K t) and a failure criterion index ( F I or Φ). Two case studies are investigated: a double notched plate and a tube with a transverse hole.